FUEL SYSTEM AND THROTTLE BODY 7-11
FUEL PUMP/FUEL LEVEL GAUGE
REASSEMBLY AND INSTALLATION
Install the fuel pump/fuel level gauge in the reverse order of
removal and disassembly, and pay attention to the following
points:
• Install the new O-rings to the fuel pump, fuel pressure regula-
tor and fuel feed hose.
• Apply thin coat of the engine oil to the O-rings.
• Install the fuel pump to its holder and connect the lead wire
coupler.
• Connect the fuel feed hose securely.
Use the new O-rings to prevent fuel leakage.
To Next Page
Loading...
