1-6 GENERAL INFORMATION
LIQUID AMOUNT OF WATER/ENGINE COOLANT
Solution capacity (total): 1 300 ml (1.4/1.1 US/Imp qt)
For engine coolant mixture information, refer to cooling system section, page 8-3.
Mixing of anti-freeze/engine coolant should be limited to 60%. Mixing beyond it would reduce
its efficiency. If the anti-freeze/engine coolant mixing ratio is below 50%, rust inhabiting perfor-
mance is greatly reduced. Be sure to mix it above 50% even though the atmospheric tempera-
ture does not go down to the freezing point.
To Next Page
Loading...
