CHASSIS 9-67
• Place a rag over the pistons to prevent them from popping out
and then force out the pistons using compressed air.
• Remove the dust seals and piston seals.
CALIPER INSPECTION
BRAKE CALIPER
Inspect the brake caliper cylinder wall for nicks, scratches and
other damage. If any damage is found, replace the caliper with a
new one.
BRAKE CALIPER PISTON
Inspect the brake caliper piston surface for any scratches and
other damage. If any damage is found, replace the caliper piston
with a new one.
CALIPER HOLDER
• Inspect the caliper holder for damage. If any damage is found,
replace it with a new one.
Do not use high pressure air to prevent piston dam-
age.
Do not reuse the removed dust seals and piston seals
to prevent fluid leakage.
To Next Page
Loading...
