6-22 FI SYSTEM/ CVT SYSTEM
FI SYSTEM/ CVT SYSTEM TROUBLESHOOTING
CUSTOMER COMPLAINT ANALYSIS
Record details of the problem (failure, complaint) and how it occurred as described by the customer. For this
purpose, use of such an inspection form will facilitate collecting information to the point required for proper
analysis and diagnosis.
EXAMPLE: CUSTOMER PROBLEM INSPECTION FORM
User name: Model: VIN: CVT No.:
Date of issue: Date Reg. Date of problem: Mileage:
Shift mode
Automatic (Normal·Power) Manual (1st·2nd·3rd·4th·5th)
Malfunction indicator
lamp condition (LED)
Always ON
Sometimes ON
Always OFF
Good condition
Malfunction display/code
(LCD)
User mode: No display Malfunction display ( )
Dealer mode: No code
Malfunction code ( )
PROBLEM SYMPTOMS
Difficult Starting Poor Driveability
No cranking Hesitation on acceleration
No initial combustion Back fire/ After fire
No combustion Lack of power
Poor starting at
( cold warm always)
Surging
Abnormal knocking
Other CVT will not shift
Engine rpm jumps briefly
Other
Poor Idling
Engine Stall when
Poor fast Idle Immediately after start
Abnormal idling speed
( High Low) ( r/min)
Throttle valve is opened
Throttle valve is closed
Unstable Load is applied
Hunting ( r/min. to r/min) Other
Other
OTHERS:
To Next Page
Loading...
