ENGINE 3-59
ENGINE REASSEMBLY
• Reassemble the engine in the reverse order of disassembly.
• The following steps require special attention or precautionary
measures should be taken.
NOTE:
Apply engine oil to each running and sliding part before reas-
sembling.
RETURN OIL PUMP
• Install the return oil pump and insert the pin
1 into the shaft.
• Install the pin aligning to the groove of the return oil pump
gear and fit a circlip.
PRIMARY DRIVEN GEAR/ CRANKSHAFT
• Install the primary driven gear
2 and crankshaft assembly
3.
To Next Page
Loading...
