9-48 CHASSIS
REMOVAL
• Place the motorcycle on the center stand.
• Remove the final gear case cover
1.
• Disconnect the brake-lock cable
2. (9-85)
• Remove the cotter pin. (For E-03, 28, 33)
• Loosen the rear axle nut.
• Remove the caliper.
• Remove the axle nut and draw out the rear axle.
• Remove the spacer
3.
• Remove the rear wheel.
• Remove the collars
4.
Do not operate the brake lever while removing the rear
wheel.
To Next Page
Loading...
