ENGINE 3-55
OIL JET
• Check the oil jets for clogging.
NOTE:
Before fitting, coat the O-ring with engine oil. Use a new O-ring.
Note the carved mark not to mistake the size.
NOTE:
The crankcase side of the oil jet is identified by letter 8.
NOTE:
The cylinder head side of the oil jet is identified by letter 14.
PISTON COOLING NOZZLE
• Check the piston cooling nozzle for clogging or deformation.
NOTE:
Before installing, coat the O-ring with engine oil. Use a new
O-ring.
To Next Page
Loading...
