Suzuki AN650 2002 - Page 55

3-4 ENGINE
• Remove the IAP sensor lead wire coupler
1, IAT sensor 2,
and PAIR solenoid valve lead wire coupler
3.
• Disconnect the vacuum hose
4.
• Loosen the throttle body clamp screws.
• Remove the PAIR solenoid valve 5.
• Remove the air chamber
6.
• Disconnect the throttle cables
7.
• Disconnect the injector couplers
8.
• Disconnect the TP sensor coupler
9 and IAC valve coupler
0.
• Loosen the throttle body clamp screws.
• Disconnect the fuel delivery hose.
• Remove the throttle body ass’y.