ENGINE 3-59
• Install the gearshift forks and their shafts as shown.
6 For 3rd/4th drive gears
7 For 6th driven gear
8 For 5th driven gear
• Apply a small quantity of THREAD LOCK to the bearing
retainer screws 9.
• Tighten the bearing retainer screws 9 and gearshift fork shaft
retainer bolt 0 to the specified torque.
99000-32050: THREAD LOCK “1342”
Bearing retainer screw: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Gearshift fork shaft retainer bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
SAMPLE
To Next Page
Loading...
