3-82 ENGINE
• Apply SUZUKI BOND to the mating surface of the lower
crankcase.
99104-31140: SUZUKI BOND “1207B” (USA)
99000-31110: SUZUKI BOND “1215” (Others)
NOTE:
Use of SUZUKI BOND is as follows:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the crankcases within few minutes.
* Take extreme care not to apply any BOND to the oil hole, oil
groove and bearing.
* Apply to distorted surfaces as it forms a comparatively thick
film.
• Match the middle and lower crankcases.
NOTE:
Align the gearshift forks 5 with their grooves 6.
SAMPLE
To Next Page
Loading...
