Suzuki GSX-R1000K5 - Page 135

ENGINE 3-81
TRANSMISSION
• Install the bearing pins 1 and the C-rings 2 on the middle
crankcase.
• Install the countershaft assembly on the middle crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the driveshaft assembly on the middle crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.
• Install the oil seal 3.
• Turn the bearings to install the bearing dowel pins A in the
respective positions.
• Install the O-rings.
• Install the dowel pins 4.
SAMPLE