3-80 ENGINE
• Tighten the other crankcase bolts a little at a time to equalize
the pressure.
Crankcase bolt: (M6) Initial: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
Final : 11 N·m (1.1 kgf-m, 8.0 lb-ft)
(M8) Initial : 15 N·m (1.5 kgf-m, 11.0 lb-ft)
Final : 26 N
·
m (2.6 kgf-m, 19.0 lb-ft)
NOTE:
Fit a new gasket washer to the crankcase bolt A.
NOTE:
After the crankshaft journal bolts and crankcase bolts have been
tightened, check if the crankshaft rotates smoothly.
Use a new gasket washer to prevent oil leakage.
SAMPLE
To Next Page
Loading...
