Suzuki GSX-R1000K5 - Page 142

3-88 ENGINE
• Apply SUZUKI BOND lightly to the groove of signal generator
lead wire grommet.
99104-31140: SUZUKI BOND “1207B” (USA)
99000-31140: SUZUKI BOND “1207B” (Others)
CAM CHAIN DRIVE SPROCKET
• Install the cam chain drive sprocket onto the crankshaft.
NOTE:
When installing the cam chain drive sprocket, align the wide
spline teeth A and B.
CAM CHAIN TENSIONER/CAM CHAIN GUIDE
• Install the cam chain.
• Apply a small quantity of THREAD LOCK to the cam chain
tensioner bolt and cam chain guide bolt.
• Install the cam chain tensioner 1 along with the washer 2.
• Install the cam chain guide 3.
99000-32050: THREAD LOCK “1342”
 Cam chain tensioner bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
Cam chain guide bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
STARTER CLUTCH
• Install the washer 1.
• Install the starter clutch assembly onto the crankshaft.
NOTE:
When installing the starter clutch assembly, align the wide spline
teeth A and B.
SAMPLE