ENGINE 3-91
• Install the gearshift cam stopper plate 6.
NOTE:
Align the gearshift cam pin B with the gearshift cam stopper
plate hole C.
• Apply a small quantity of THREAD LOCK to the gearshift cam
stopper plate bolt and tighten it to the specified torque.
99000-32050: THREAD LOCK “1342”
Gearshift cam stopper plate bolt:
13 N·m (1.3 kgf-m, 9.5 lb-ft)
• Install the gearshift shaft assembly 7 and washer 8 as
shown.
NOTE:
Pinch the gearshift arm stopper 9 with return spring ends D.
• Install the washer 0 and snap ring A.
SAMPLE
To Next Page
Loading...
