3-94 ENGINE
• Install the clutch sleeve hub assembly 9 onto the counter-
shaft.
• Install the washer 0 and spring washer A.
NOTE:
* Before installing the washer 0, visually inspect the washer
surface for wear and damage. If necessary, replace it with a
new one.
* The conical curve side of spring washer A faces outside.
• Hold the clutch sleeve hub with the special tool.
09920-53740: Clutch sleeve hub holder
• Tighten the clutch sleeve hub nut to the specified torque.
Clutch sleeve hub nut: 95 N·m (9.5 kgf-m, 68.5 lb-ft)
• Lock the clutch sleeve hub nut with a center punch.
• Install the spring washer seat B and spring washer C onto
the clutch sleeve hub correctly.
SAMPLE
To Next Page
Loading...
