5-20 FUEL SYSTEM AND THROTTLE BODY
• Assemble the fuel delivery pipes as shown.
• Install the primary fuel delivery pipe assembly 8 and second-
ary fuel delivery pipe assembly 9 to the throttle body assem-
bly.
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
Fuel delivery pipe mounting screw:
3.5 N·m (0.35 kgf-m, 2.5 lb-ft)
• Install the plat 0.
NOTE:
The boss G of the outside.
• Apply thin coat of the engine oil to the new O-rings.
• Install the fuel delivery pipe joint assembly.
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
Fuel delivery pipe mounting screw:
3.5 N·m (0.35 kgf-m, 2.5 lb-ft)
Never turn the fuel delivery pipes while pushing it.
Never turn the fuel injectors while installing them.
Replace the O-rings with the new ones.
SAMPLE
To Next Page
Loading...
