3-14 ENGINE
• Install the radiator mounting bracket 1.
• Install the exhaust pipe 2.
Muffler connecting bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Exhaust pipe bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Fit the new O-rings to the union of the oil cooler pipes.
• Apply THREAD LOCK to the bolts, install the oil cooler pipe
union.
99000-32050: THREAD LOCK “1342”
Oil cooler union bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Perform service and adjustment in the following items.
* Engine oil (2-13)
* Engine coolant (2-18)
* Throttle cable play (2-15)
*Clutch (2-16)
* Idling adjustment (2-14)
* Throttle valve synchronization (5-26)
* Drive chain slack (2-20)
* Wiring harness, cables and hoses (10-18)
Replace the gaskets with new ones.
SAMPLE
To Next Page
Loading...
