3-22 ENGINE
STARTER CLUTCH
• Hold the starter clutch with the special tool.
09920-34830: Starter clutch holder
• Remove the starter clutch bolt and washer.
• Remove the starter clutch assembly and washer.
CAM CHAIN/CAM CHAIN TENSIONER/CAM CHAIN GUIDE
• Remove the cam chain tensioner 1 and cam chain guide 2.
• Remove the cam chain 3 and cam chain drive sprocket 4.
CKP SENSOR
• Remove the CKP sensor 1.
CKP SENSOR INSPECTION (4-35)
GENERATOR COVER
• Remove the generator cover.
• Remove the dowel pins and gasket.
GENERATOR ROTOR
• Hold the generator rotor with the special tool.
09930-44520: Rotor holder
• Remove the generator rotor bolt.
SAMPLE
To Next Page
Loading...
