ENGINE 3-23
• Install a bolt A of suitable size to the left end of crankshaft.
SUITABLE BOLT A [M12, length: 28 – 38 mm (1.1 – 1.5 in)]
• Remove the generator rotor with the special tool.
09930-34980: Rotor remover
WATER PUMP
• Remove the water hose 1 and water inlet cover 2.
• Remove the water pump 3.
WATER PUMP SERVICING (7-11)
GEAR POSITION SWITCH
• Remove the gear position switch 1.
CRANKCASE BREATHER (PCV) COVER
• Remove the crankcase breather cover 1.
28 – 38 mm (1.1 – 1.5 in)
SAMPLE
To Next Page
Loading...
