3-42 ENGINE
• Be sure that the rounded lip E of the cotter fits snugly into the
groove F in the stem end.
• Install the other valves and springs in the same manner as
described previously.
5 Valve spring retainer
6 Cotter
• Install the tappet shims and the tappets to their original posi-
tions.
NOTE:
* Apply engine oil to the stem end, shim and tappet before fitting
them.
* When seating the tappet shim, be sure the figure printed sur-
face faces the tappet.
INTAKE PIPE
• Remove the intake pipes.
• Apply SUZUKI SUPER GREASE to the O-rings.
99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the intake pipes.
Be sure to restore each spring and valve to their origi-
nal positions.
Be careful not to damage the valve and valve stem
when handling it.
SAMPLE
To Next Page
Loading...
