ENGINE 3-59
• Apply SUZUKI SUPER GREASE “A” to the bearing, O-ring
and oil seal lip.
• Install the oil seal with the special tool.
( 09913-70210: Bearing installer set
NOTE:
When installing the oil seals, the stamped mark on the oil seal
faces to the special tool.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010:SUZUKI SUPER GREASE “A” (Others)
"
• Apply a small quantity of THREAD LOCK to the screws and
install the bearing retainer.
& 99000-32050: THREAD LOCK “1342”
• Install the generator stator.
Replace the removed oil seal and O-ring with new
ones.
To Next Page
Loading...
