ENGINE 3-51
OIL PUMP
"
& 99000-32050: THREAD LOCK “1342”
CRANKCASE
OIL SUMP FILTER
• Remove the oil sump filter cover
1.
• Remove the oil sump filter
2.
• Clean the oil sump filter using compressed air.
• When installing the O-ring, apply grease to it.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
The oil pump case securing screw is applied with
SUZUKI THREAD LOCK “1342”. If an attempt is made
to overhaul the pump assembly, the screw may be
damaged. Only the oil pump unit is available as a
replacement.
To Next Page
Loading...
