7-38 CHASSIS
REASSEMBLY AND REMOUNTING
Reassemble and remount the front suspension in the reverse
order of removal and disassembly. Pay attention to the following
points:
• Apply SUZUKI SUPER GREASE “A” to the hub bearings and
the lip of the dust seals before installing them.
+ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Install the hub bearings using the special tool.
* 09924-84510: Bearing installer set
NOTE:
Install the outer bearing
1, the spacer
2, and then the inner
bearing
3. Make sure the sealed side of the bearing faces out-
ward.
• Install the steering knuckle dust seal using the special tool.
* 09913-70210: Bearing installer set
To Next Page
Loading...
