CHASSIS 7-39
• Install the knuckle end to the wishbone arm by using the spe-
cial tools.
* 09913-70210: Bearing installer set
• Install the new snap ring securely.
• Apply THREAD LOCK SUPER “1303” or “1322” to the wish-
bone arm pivot bolts, and then tighten the nuts
1 to the spec-
ified torque.
, 99000-32030: THREAD LOCK SUPER “1303” (USA)
- 99000-32110: THREAD LOCK SUPER “1322” (Others)
# Wishbone arm pivot nut: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
• Tighten the shock absorber mounting lower bolt/nut
2 to the
specified torque.
# Shock absorber mounting lower nut:
60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Tighten the shock absorber mounting upper bolt
3.
• Tighten the engine coolant reservoir mounting bolt.
# Shock absorber mounting upper bolt:
55 N·m (5.5 kgf-m, 40.0 lb-ft)
To Next Page
Loading...
