CHASSIS 7-11
FRONT AND REAR WHEELS
CONSTRUCTION
REMOVAL
• Place the vehicle on level ground.
• Support the vehicle with a jack or wooden block.
• Remove the wheel set nuts.
• Remove the front and rear wheels.
REMOUNTING
Remount the wheels in the reverse order of removal. Pay atten-
tion to the following points:
• When installing each wheel, make sure the arrow
A on the
tire points in the direction of rotation.
• Tighten the wheel set nuts to the specified torque.
# Front and rear wheel set nut:
50 N·m (5.0 kgf-m, 36.0 lb-ft)
ITEM N·m kgf-m lb-ft
A
50 5.0 36.0
@
A
Wheel set nut
To Next Page
Loading...
