3-16 ENGINE
• Remove the dowel pins and gasket
3.
PISTON
• Remove the piston by removing the piston pin circlip
1.
NOTE:
Place a rag under the piston so as not to drop the piston pin cir-
clip into the crankcase.
ENGINE BOTTOM SIDE
SPEEDOMETER GEARBOX
• Remove the speedometer gearbox.
STARTER CUP
• Remove the starter cup nut by using a suitable bar.
• Remove the starter cup.
• Remove the transfer gearshift cam stopper
1.
• Remove the transfer gearshift shaft snap ring
2.
To Next Page
Loading...
