Suzuki LT-F500F 2002 - Page 59

ENGINE 3-17
• Remove the generator rotor cover.
TRANSFER
• Remove the starter driven gear
1, the spacer 2, the starter
idle gear
3, the washer 4, the transfer idle gear 5, the
washer
6, the transfer No. 2 gear 7, the washer 8 and the
transfer output gear
9.
• Remove the starter driven gear shaft
0, the starter idle gear
shaft
A, the gear fork shaft B, the gearshift fork C, the
spacer and washer
D, the transfer selection dog E, and the
transfer output gear spacer
F.
• Remove the snap ring
G, washer H and the transfer No. 1
gear
I.
• Remove the bush
J and spacer K.
• Remove the washer
L and the gearshift shaft M.