Suzuki LT-F500F 2002 - BRAKE CALIPER REASSEMBLY AND REMOUNTING

CHASSIS 7-55
BRAKE CALIPER REASSEMBLY AND
REMOUNTING
Reassemble and remount the brake caliper in the reverse order
of removal and disassembly. Pay attention to the following
points:
• Wash the caliper bores and pistons with the specified brake
fluid. Thoroughly wash the dust seal groove and piston seal
groove.
' Specification and classification: DOT 4
$
PISTON SEALS
• Install the piston seal
1 and dust seal 2 as shown.
BRAKE CALIPER HOLDER
• Apply SUZUKI SILICON GREASE to the pin.
( 99000-25100: SUZUKI SILICON GREASE
* Wash the brake caliper components with new brake
fluid before reassembly.
* Do not wipe the brake fluid off with a rag after wash-
ing the components.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine, etc.
* Replace the removed piston seals and dust seals
with new ones.
* Apply brake fluid to all of the seals, brake caliper
bores and pistons before reassembly.