6-4 COOLING AND LUBRICATION SYSTEM
RADIATOR AND HOSES
RADIATOR REMOVAL
• Remove the front fender. (#7-6)
• Drain engine coolant by removing the drain plug.
• Disconnect the cooling fan motor lead wire coupler
1 and
cooling fan thermo-switch lead wire coupler
2.
• Disconnect the upper and lower radiator hoses.
• Disconnect the siphon hose from the radiator.
• Remove the two mounting bolts and radiator assembly.
RADIATOR REMOUNTING
• Install the radiator.
• Connect the radiator hoses. (#9-18)
• Connect the siphon hose, cooling fan thermo-switch lead wire
coupler and cooling fan motor lead wire coupler.
• Install the drain plug with a new sealing washer.
• Pour engine coolant. (#2-12)
• Install the front fender.
RADIATOR RESERVOIR TANK REMOVAL AND
REMOUNTING
• Remove the reservoir tank mounting bolts and disconnect the
siphon hose from the reservoir tank and drain engine coolant.
• Install the reservoir tank in the reverse order of removal.
• Fill the reservoir tank to the upper level line.