7-50 CHASSIS
REAR BRAKE
CONSTRUCTION
&
$
FWD
ITEM N·m kgf
-
m lb-ft
A
23.0 2.3 16.5
B
10.0 1.0 7.0
C
32.0 3.2 23.0
D
7.5 0.8 5.5
@
1
Reservoir tank cap
2
Reservoir tank
3
Reservoir hose
4
Connector
5
O-ring
6
Brake hose
7
Piston/cup set
8
Push rod
9
Boot
0
Spring
A
Brake pad
B
Caliper holder
C
Caliper
D
Insulator
E
Piston
F
Dust seal
G
Oil seal
A
Brake hose union bolt
B
Master cylinder mounting bolt
C
Caliper mounting bolt
D
Air bleeder valve
* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or mix
different types of fluid, such as silicone-based or petroleum-based brake fluids.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or which has been stored for a long periods of time.
* When storing brake fluid, seal the container completely and keep it away from children.
* When replenishing brake fluid, take care not to get dust into the fluid.
* When washing brake components, use new brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the brake disc with high quality brake cleaner or a neutral detergent.
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc. and will damage them severly.
To Next Page
Loading...
