7-64 CHASSIS
REMOVAL
• Remove the mud guards (left and right). (!7-8)
• Remove the rear wheels. (!7-11)
• Remove the rear caliper. (!7-51)
• Remove the rear drive gear case and rear axle housings.
(!4-22)
• Disconnect the rear brake hose from the clamp and guide.
• Disconnect the parking cable from the swingarm by removing
the clip
1.
• Remove the rear shock absorbers (left and right).
• Loosen the swingarm pivot bolt locknut
2 with the special
tool.
* 09940-14970: Swingarm pivot adjust wrench
• Remove the swingarm pivot bolt
3 (RH) with the special tool.
* 09900-18710: Hexagon socket (12 mm)
• Remove the swingarm pivot bolt
4 (LH).
• Remove the rear swingarm.
To Next Page
Loading...
