8-32 ELECTRICAL SYSTEM
BRAKE LIGHT/TAILLIGHT
BULB REPLACEMENT
• Remove the brake light/taillight assembly backward.
✡
Boss of connector
• Remove the socket.
• Remove the bulb.
• Install the new bulb in the reverse order of removal.
• Install the brake light/taillight assembly.
"
Brake light/taillight: 12 V 21/5 W
If you touch the bulb with your bare hands, clean the bulb with a cloth moistened with
alcohol or soapy water to prevent premature bulb failure.
!
Be sure to fix the boss of connector correctly as
shown.
Boss of
connector
Boss of
connector
To Next Page
Loading...
