3-78 ENGINE
ENGINE REASSEMBLY
Reassemble the engine in the reverse order of disassembly.
Pay special attention to the following points:
NOTE:
Apply engine oil to each running and sliding part before reas-
sembling.
ENGINE BOTTOM SIDE
CRANKSHAFT
• When mounting the crankshaft in the crankcase, it is neces-
sary to pull its left end into the crankcase with the special tool.
NOTE:
Use the front fork oil seal installer and suitable bars
A as an
attachment.
( 09910-32812: Crankshaft installer
09940-52861: Front fork oil seal installer
BALANCER
• Install the balancershaft.
• Install the key
1.
• Install the balancershaft driven gear by aligning the punched
marks.
To Next Page
Loading...
