4-10 DRIVE TRAIN
DIFFERENTIAL BEARING/BEVEL RING GEAR
Check the outer race play and smooth rotation of the bearing by
hand while it is on the differential.
Inspect the ring gear for wear or damage.
If the ring gear is damaged, inspect the pinion gear also.
If any defects are found, replace the bearings and ring gear with
the new ones.
BEARING REMOVAL !4-4.
FRONT DRIVE (DIFFERENTIAL) REASSEMBLY
Reassemble the front drive in the reverse order of disassembly.
Pay attention to the following points:
NOTE:
Before reassembly, thoroughly clean all parts in cleaning sol-
vent.
DIFFERENTIAL BEARING
• Drive the bearings to the differential with the special tool.
# 09913-70210: Bearing installer set
To Next Page
Loading...
