DRIVE TRAIN 4-31
REAR DRIVE REASSEMBLY
Reassemble the rear drive in the reverse order of disassembly.
Pay attention to the following points:
NOTE:
Before reassembly, thoroughly clean all parts in cleaning sol-
vent.
GEAR CASE BEARING
• Drive the bearings into the gear case and case cover with the
special tool.
# 09913-70210: Bearing installer set
GEAR CASE OIL SEAL
• Install the new oil seals into the gear case and case cover
with the special tool.
• Apply grease to the new oil seal lips.
# 09913-70210: Bearing installer set
$ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
To Next Page
Loading...
