3-52 ENGINE
GEARSHIFT CAM STOPPER
• Apply a small quantity of THREAD LOCK “1342” to the thread
and tighten the gearshift cam stopper to the specified torque.
& 99000-32050: THREAD LOCK “1342”
# Gearshift cam stopper: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
DRIVE BEVEL GEAR DISASSEMBLY
• Using a chisel, unlock the nut.
• Hold the output shaft with the special tool.
( 09930-73150: Output shaft holder
• Remove the drive bevel gear nut.
• Remove the washer
1 and drive bevel gear
2.
• Remove the shim
3.
To Next Page
Loading...
