Suzuki LT-F500F 2002 - Page 137

ENGINE 3-95
TRANSFER
• Install the spacer
1.
• Install the output gear
2 and washer 3.
• Install the spacer
4.
• Install the bushing by aligning the hole
A with the hole B on
the shaft.
• Install the transfer No. 1 gear
5.
• Install the washer
6 and snap ring 7.
• Install the transfer selection dog
8.
• Install the washer
9 and spacer 0.
• Install the transfer No. 2 gear
A.
• Install the washer
B.