Suzuki LT-F500F 2002 - Page 178

DRIVE TRAIN 4-29
Inspect the oil seal for wear or damage.
Check the inner race play and smooth rotation of the bearing by
hand while it is in the case.
If any defects are found, replace the oil seal and bearing with the
new ones.
OIL SEAL AND BEARING REMOVAL !4-25.
Inspect the parking cam cover oil seal for wear or damage.
If any wear or damage is found, replace the oil seal with a new
one.
OIL SEAL REMOVAL !4-25.
REAR DRIVE GEAR CASE
Check the outer race play and smooth rotation of the bearing by
hand while it is on the pinion gear shaft.
Inspect the pinion gear for wear or damage.
If the pinion gear is damaged, inspect the ring gear also.
If any defects are found, replace the bearing and gear with the
new ones.
BEARING AND GEAR REMOVAL !4-28.
Inspect the gear case and case cover oil seals for wear or dam-
age.
If any wear or damage is found, replace the oil seal with a new
one.
OIL SEAL REMOVAL !4-27.