7-78 CHASSIS
• Apply SUZUKI SUPER GREASE “A” to the gearshift lever
rod.
+ 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Turn the gearshift lever rod
1 so that the rod length
A would
be 23 mm (0.9 in) as shown in the illustration.
NOTE:
The slant on the shift lever rod must be faced to the right side of
the vehicle.
• Install the shift knob to the gearshift lever with the button
depressed.
, 99000-32030: THREAD LOCK SUPER “1303”
• Tighten the screws to the specified torque.
# Gearshift lever screw: 2.0 N·m (0.2 kgf-m, 1.5 lb-ft)
Left
Right
To Next Page
Loading...
