7-84 CHASSIS
REVERSE GEAR CABLE AND PARKING CABLE
Before installing the cable, release the cable adjuster lock.
• Slide the lock cover
1 on the cable adjuster.
• Push out the lock piece
2 to an extent where the adjuster
3
slides smoothly.
NOTE:
Do not remove the lock piece
2 from the cable adjuster.
• Fit the cable adjuster
4 onto the selection arm
5 securely.
NOTE:
Before fitting the cable adjuster, make sure that the gear shift
lever position is same as the selection lever arm position.
• Push the lock piece
6 into the cable adjuster.
• Slide the lock cover
7.
To Next Page
Loading...
