ENGINE 3-21
GEARSHIFT CAM STOPPER
• Remove the cam stopper nut
1, the gearshift cam stopper
2
and spring
3.
-
OIL PUMP DRIVE GEAR
• Remove the oil pump drive gear bolt by holding the oil pump
driven gear with the special tool.
( 09930-40113: Rotor holder
• Remove the washer
1 and oil pump drive gear
2.
• Remove the pin
3 and spacer
4.
OIL PUMP
• Remove the snap ring
1.
• Remove the oil pump driven gear
2.
• Remove the pin
3 and washer
4.
• Remove the oil pump.
To Next Page
Loading...
