Svantek SVAN 974 - Default Chapter; Table of Contents

3
SVANTEK 974 User Manual
CONTENTS
1. INTRODUCTION 6
1.1. SVAN 974 - Vibration Level Meter & Analyser 6
1.2. General features of SVAN 974 6
1.3. Accessories included 7
1.4. Accessories available 7
1.5. Software options available 7
1.6. General parameters 7
2. MANUAL CONTROL OF THE INSTRUMENT 8
2.1 Control push-buttons on the front panel 8
2.2 Input and output sockets of the instrument 11
3. GENERAL INFORMATION 12
3.1. Basis of the instrument’s control 12
3.2. Powering of the instrument 15
3.3. Getting started 16
3.4. Description of icons 17
3.5. Data saving 18
3.6. Files downloading and uploading 22
3.7. Activation of the optional functions 22
4. FUNCTIONS OF THE INSTRUMENT – Function 23
4.1. Selection of the instrument mode – Mode 23
4.2. Measurement functions of the instrument - Measurement Function 23
4.3. Instrument’s calibration – Calibration 24
4.3.1. System Check 24
4.3.2. Calibration by Sensitivity 25
4.3.3. Calibration By Measurement 25
4.3.4. History of performed calibrations – Calibration History 26
4.3.5. Clearing calibration records - Clear Calibr. History 27
4.3.6. Post measurement calibration – Post Calibration 27
5. SETTING UP THE MEASUREMENT – Measurement 28
5.1 Setting up the main measurement parameters - General Settings 28
5.2 Setting up the measurement trigger – Measurement Trigger 30
5.3 Setting up the parameters for profiles – Profiles 31
5.4 Setting up the data logging – Logging 32
5.4.1 Setting up the logger general parameters – Logger Setup 33
5.4.2 Selection of results for logging – Logger Results 34
5.4.3 Selection of additional summary results for saving – Summary Results 35
5.4.4 Setting up the logger trigger parameters – Logger Trigger 35
5.4.5 Setting up the event recording – Event Recording 36
5.4.6 Setting up the markers – Marker Setup 38