7.1.2 Opening file – Open
The user can open logger file from the file list.
To do this the user should select the file and
press the <ENTER> push-button. After
opening the command list select the Open
position and press <ENTER> again.
Opening of the logger file means that the
measurement results saved in this file will be
loaded to the instrument's operation memory
and may be reviewed on the screen. The
results are loaded together with Mode and
Measurement Function settings, but other
measurement settings are as before opening
the measurement file.
After loading the file, only summary results saved in the logger file as records can be viewed at the display. Each
record contains measurement data for one cycle (measured with integration time step).
The record counter is displayed in the same
line with the file name.
To see next cycle data the user should select
the record counter position by means of ▲ or
▼ push-button and then change the record
number by means of the ◄ or ► push-button
pressed together with <Alt>.
7.1.3 Deleting file/directory – Delete
The user can to delete a file or directory from
the file/directory list. To do this the user
should select the file/directory and press the
<ENTER> push-button. After opening the
command list, select the Delete position and
press <ENTER>. The instrument will ask for
confirmation of this action since it cannot be
undone once a file/directory has been
deleted.
7.1.4 Erasing all files in a directory – Delete All
The user can delete all elements from the
directory. To do this the user should select the
desired directory and open it by means of the
► push-button. Then select any file or
subdirectory and press <ENTER>. In the
command list select the Delete All command
and press <ENTER>. The instrument will ask
for confirmation of this action since it cannot
be undone once files have been erased.
To Next Page
Loading...
