Svantek SVAN 974 - Page 5

5
SVANTEK 974 User Manual
10.3. Saving the 1/1 or 1/3 Octave spectra as a time history – Logger Results 66
10.4. Setting up the 1/1 Octave and 1/3 Octave spectra view 66
10.4.1. Presentation of 1/1 Octave and 1/3 Octave spectra 67
10.4.2. Setting up the scale of the spectrum plot - Scale 67
10.4.3. Selection of the spectra to be viewed - Spectrum View 68
10.4.4. Selection of the spectrum type - Spectrum Type 69
11. FFT ANALYSER 70
11.1. Selection of FFT function 70
11.2. Configururing FFT analyser 70
11.2.1. Checking the measurement range of FFT analisys - Range 71
11.2.2. Setting up the parameters of FFT analysis - FFT 71
11.3. Saving the FFT spectra as a time history - Logger Results 72
11.4. Setting up the FFT spectra view 72
11.4.1. Presentation of FFT spectra 73
11.4.2. Setting up the scale of spectrum plot - Scale 74
11.4.3. Selection of the spectra to be viewed - Spectrum View 75
11.4.4. Selection of the spectrum type - Spectrum Type 75
12. MAINTENANCE 76
12.1. Powering the instrument 76
12.2. Memory card extraction and insertion 76
12.3. Transducers 77
12.4. Resetting the instrument 77
12.5. Firmware upgrade 78
12.6. Storing the instrument 78
12.7. Transportation and carrying 78
12.8. Cleaning 78
12.9. Troubleshooting 78
APPENDIXES
A. REMOTE CONTROL
B. DATA FILE STRUCTURES
C. TECHNICAL SPECIFICATIONS
D. DEFINITIONS AND FORMULAE OF MEASURED VALUES