Svantek SVAN 974 - Page 9

9
SVANTEK 974 User Manual
<Menu>
This push-button (<ENTER> pressed together with <Shift>) enables the user to enter
the main list containing seven sub-lists: Function, Measurement, Display, File,
Instrument and Auxiliary Setup. Each of the above-mentioned menu lists consists of
sub-lists, elements and data windows. These main sub-lists will be described in detail in
the following chapters of the manual. Double pressing the <Menu> push-button enters
a list containing the last eight opened sub-lists. It often speeds up the control of the
instrument as the user has faster access to the most frequently used sub-lists for easy
navigation.
<Save>
This push-button (<ENTER> pressed together with <Alt>) enables the user to save the
measurement results (see description in chapter 3.5).
<ESC>
This push-button closes the control lists, sub-lists or windows. It acts in an opposite way
to the <ENTER> push-button. When the window is closed after pressing the <ESC>
push-button, any changes made in it are ignored in almost all cases.
<Cal.>
This push-button (<ESC> pressed together with <Shift>) opens the Calibration sub-
list.
<S/P>
This push-button (<ESC> pressed together with <Alt>) enables the user to pause or
break the measurement process temporarily during the measurement or to save the
setup file if the instrument is not running the measurement.
◄, ►
These push-buttons enable the user specifically to:
• select the column in a multi column parameter list;
• select the parameters value in an active position (e.g. Start Delay period: 1s, 2s, 3s,
… etc.);
• control the cursor in Spectrum and Logger modes of result presentation;
• select the position of the character in the text editing screen;
• activate markers 2 and 3;
• speed up changing the numerical values of the parameters when pressed and held.
(◄, ►)
The ◄ or ► push-buttons pressed together with <Shift> enable the user specifically to:
• change the parameters value with double step (e.g. Start Delay period: form 1s to
11s, 21s, … etc.);
• to shift cursor from the first to the last position and back on the graphical view mode.
[◄, ►]
The ◄ or ► push-buttons pressed together with <Alt> enable the user specifically to:
• select the parameters value in an active position in the matrix parameter list;
• scroll the parameters in an active field on the result view screen;
• insert or delete a character in the text edition screen.
▲, ▼
These push-buttons enable the user specifically to:
• select line in the list;
• select the active field on the result view screen;
• select the correct character from the list in the text edition screen;
• activate markers 1 and 4.
(▲,▼)
The ▲ or ▼ push-buttons pressed together with <Shift> enable the user specifically to:
• shift the cursor from the first to the last position and back on the menu list;
• change the relationship between the Y-axis and X-axis of all plots presented on the
screen.
[▲, ▼]
The ▲ or ▼ push-buttons pressed together with <Alt> enable the user specifically to:
• change the mode of result presentation;
• programme the Real-Time Clock (RTC) and Timer.