5: Function Reference
F67 <SP>TAILS<SEP><-nn>
where:
TAILS = ASCII string indicating a TAI Epoch leap second value will be entered.
<-nn> = Leap second valued entered, -19 to –49.
Sample entry: F67 TAILS -33<CR>
Response: OK<CR><LF>
Adding a Leap Second:
To set the next leap second insertion time for adding a leap second, enter a continuous
string of the form:
F67 <SP>ADD<SEP><MONTH><SEP><YEAR>
where:
ADD = ASCII string indicating a leap second will be added.
<MONTH> = Month number that the leap second will be added, on the last day of the
month, MAR, JUN, SEP, DEC.
<YEAR> = Year that the leap second will be subtracted, 2000 to 2030.
Subtracting a leap second:
To set the next leap second insertion time for subtracting a leap second, enter a continuous
string of the form:
F67 <SP>SUB<SP><MONTH><SEP><YEAR><CR>
where:
SUB = ASCII string indicating a leap second will be subtracted.
<MONTH> = Month number that the leap second will be subtracted, on the last day of the
month MAR, JUN, SEP, DEC.
<YEAR> = Year that the leap second will be subtracted, 2001 to 2030.
Sample entry: F67 SUB DEC 2007<CR>
Response: OK<CR><LF>
Setting the manual leap second function to no event:
To select no leap second insertion event, enter a continuous string of the form:
Page 88 of 221 .................................098-00116-000 Rev. A
To Next Page
Loading...
Need help?
General
