Symmetricom XL-GPS User Manual

F119 – GPS Receiver Configuration
XL-GPS responds:
OK<CR><LF>
To obtain the configuration of the GPS receiver, enter the following:
F119<S>C<CR>
where:
F
= ASCII character F.
119
= function number.
<S>
= ASCII space character one or more.
<C>
= ASCII character denotes reference configuration query.
<CR><LF>
=
line terminator, either a carriage return and line feed for output strings or a carriage
return only for input strings.
For example, enter:
F119 C<CR>
XL-GPS responds:
F119 PRIMARY<CR><LF>
To change the configuration of the GPS receiver as a primary reference source, enter the
following:
F119<S>C<S><CONGFIG><CR>
where:
F
= ASCII character F.
119
= function number.
<S>
= ASCII space character one or more.
<C>
= ASCII character denotes reference configuration query.
<CONFIG>
= Reference Source Configuration: PRI, or STBY
<CR><LF>
=
line terminator, either a carriage return and line feed for output strings or a carriage
return only for input strings.
098-00116-000 Rev. A............................... Page 147 of 221

Symmetricom XL-GPS Specifications

General

Brand	Symmetricom
Model	XL-GPS
Category	Receiver
Language	English