121
(Continued)
Empty
The selected folder is empty.
• Move tracks into the folder and retry the
operation.
The server is not found on the network.
• Check to see if the server is connected to the same
network as this unit, and retry the connection to
this unit. (⇒ 28)
No station, track, etc. is registered to the favourite
list or playlist.
• Add a station or track to the list. (⇒ 54, 107)
Error
Incorrect operation is performed.
• Read the instructions and try again.
Fail
Network connection is not complete.
• Try the setting again. (⇒ 28)
Firmware update is available
The firmware (free of charge) for this unit is
available.
Press [OK].
Press [ ], [ ] to select “Yes” and then press
[OK].
• The progress is displayed as “Updating
%”
while updating. (“ ” stands for a number.)
• Do not disconnect the AC mains lead or turn
this unit to standby while updating. (⇒ 101)
• When the update has finished successfully,
“Success” is displayed.
Press [ ] on the unit to turn this unit off and
on.
• For the update information, refer to the following
website.
www.technics.com/support/firmware/
“F
” (“ ” stands for a number.)
An abnormality has occurred. (If this unit detects an
abnormality, the protection circuit is activated, and
the power may be turned off automatically.)
• Is this unit placed in an extremely hot place?
• Wait a few seconds and then turn the unit on
again. (The protection circuit will be deactivated.)
If the problem persists, write down the displayed
number, disconnect the AC mains lead and consult
your dealer.
Load Fail
The firmware cannot be found on the USB flash
memory.
• Download the latest firmware on the USB flash
memory and try again. (⇒ 102)
No Device
No USB device is connected.
• Connect the USB device to be played. (⇒ 52)
USB device is not playable.
• Check to see if the file system of USB device is
playable. (⇒ 130)
To Next Page
Loading...
Need help?
General
