Appendix
B:
Specification
Table
A-4:
Electrical Characteristics (Cont.)
Characteristics Performance Requirements
REPETITIVE Store Mode
SAMPLE and AVERAGE
0.05
ps per division
0.1
ps per division
0.2
ps per division
to 2
ps per division
(5% maximum amplitude
uncertainty)
Single Trace
CHOPIALT
100
MHZ
(-3 d613 100 MHz (-3 dB)3
100 MHz
(-3
50 MHz (-3 dB)'
10
5
SECIDIV setting
Hz'
SECIDIV setting
Hz'
ACCPEAK
0.05
ps per division
to 5 s per division
Same as NON-STORE Bandwidth
AVERAGE Mode
Sweep Limit
Adjustable from 1 to 998,000 or NO LIMIT. May be set in
incre-
ments of
1
from 1 to 200; 2 from 202 to 1,000; 10 from 1,010
to 2,000; 20 from 2,020 to 10,000; 100 from 10,100 to 20,000;
200 from 20,200 to 100,000; 1,000 from 101,000 to 200,000;
2,000 from 202,000 to 998,000.'
Weight
of Last Acquisition
1/;,
%,
1/4,
%,
26,
1/52,
%4,
%28,
or
%56
(MENU selections).
AVERAGE mode default weight is
NON-STORE CHOP Mode Switching Rate
500 kHz
2
30%'
AID Converter Linearity
Monotonic with no missing codes1
Analog
CH1lCH2 Delay Match
-+
1.0 nsl
NON-STORE Common-Mode Reiection Ratio
At least 10 to 1 at 50 MHz.
(CMRR)
Checked at 10
mV per division for common-mode signals of
six divisions or less with the
VOLTSIDIV Variable control ad-
justed for the best CMRR at 50 kHz.
Input Current
1
nA or less (0.5 division or less trace shift when switching
between DC and GND input coupling with the
VOLTSIDIV
switch set to 2 mV per division).'
lnput Characteristics
Resistance 1
Mn
2
2%'
Capacitance 20 pF
-+
2pF1
Lm
'Performance requirement not checked in manual.
30ne hundred
MHz
bandwidth derated for temperatures outside
0"
C
to
+35"
C
and at
2
mV VOLTS/DIV setting as for NON-STORE.
I-
2232
User Manual
A-1
1
To Next Page
Loading...
Need help?
General
