To Next Page

To Previous Page

Commands

TDS5000B Series Service Manual

5-13

:CALIBRATE:FACTORY:NOTIFY:HOURS 2000

signifying that the calibration due notifier will be displayed 2000 hours after the

last calibration.

CALibrate:FACtory:NOTify:YEARs

This command sets or returns the number of years until the user is notified that

the instrument is due for factory calibration.

CALibrate:FACtory:NOTify:YEARs {INFInite|<NR3>}

INFInite means whatever the specified maximum is for the instrument.

<NR1> set to a floating point value.

CALIBRATE:FACTORY:NOTIFY:HOURS 1.5e0

sets the calibration notification time to 1.5 years.

CALIBRATE:FACTORY:NOTIFY:HOURS?

might return

:CALIBRATE:FACTORY:NOTIFY:HOURS 1.5e0

signifying that the calibration due notifier will be displayed 1.5 years after the

last calibration.

CALibrate:FACtory:PREVious

This command backs up the calibration steps one step so that the next C ALi-

brate:FACtory:CONTInue command will repeat the factory calibration step that

just finished. Repeated CALibrate:FACtory:PREVious commands can back up as

many calibration steps as desired, at least until step one is reached. The

appropriate notifier, with signal source information, is displayed after the factory

calibration step is adjusted.

CALibrate:FACtory:PREVious

CALIBRATE:FACTORY:PREVIOUS

backs up the calibration steps one step.

Syntax

Argument

Example 1

Example 2

Syntax

Example

Tektronix TDS5000B Series Service Manual

Other manuals for Tektronix TDS5000B Series